Our Packing (Default)

Our Packing Method: The glow stickers is packed into a bubble envelope bag, or rolled up with a hard foam stick and then packed into Opp bag.
Remark:
1/This bubble envelope bag has a size of about 13*13cm /18*18cm (width*height),
2/This foam stick has about 40mm in diameter.
Warm Tip: When receiving the packages, if the stickers is damaged in transit, please raise a dispute attaching some real photos to ask a refund, the reason of dispute is "Product arrived damaged", not "xx are not as described" or "Defective". And, if just because of this, it is hopeful not to leave us a negative feedback (below 3 stars)
Like this, as seller, we can do a claim on the logistics company.
And, it isn't required to return the goods to the seller.
Thanks a lot for your understand and support!

FAQ

Q: What features of the wall stickers material?

A: Luminous stickers makes the light energy storage luminescent powder as main raw material (No radiation bad effection).
The luminous powder is a phosphors, it can store up light energy under the light's irradiation, such as natural light & fluorescence;
In the stop light irradiation, the light energy will be released slowly in the form of fluorescence way;
So at night or in the dark, still can see the light, even lasted for several hours to ten hours.
After received, do the best to make it on the outside to absorb light, do not have anything occlusion.
Can be luminous after just lighting, more light absorption, can be more bright and last for more long time!

Q: Can the wall stickers be reused?

A: Yes. But not recommended.

Q: Size error and color difference?

A: The actual size of the goods received may have an error of 1-3 MM. This is a normal phenomenon.
The color difference may be caused by some reasons such as color reflection in the monitor, lighting, background & etc. The color is subject to the real goods received. If just not like the color of the real goods received, please don't leave a negative feedback of "Bad Quality".
If mind, please be cautious to buy!

Q: Why is it that the wall stickers attached will peel off automatically slowly soon after, is it a quality problem?

A: The decorative films are mass-produced and have passed factory inspected, so it is not normal for several pieces of stickers to be poorly attached.
The possible influencing factors are as follows:
1/ Just coated surfaces with new paint, uneven surfaces, uncleaned surfaces (with dust or powder);
2/ Do not stick onto extreme cold or hot surfaces. Ideal temperature must be between 60°F & 90°F;
3/ Do not touch the adhesives by hands, the oils from your skin will prevent sticking;
4/ Before applying these decals, to make sure that there is no wax or oily products on the wanted surface;
5/ The stickers didn't stick onto the wanted surface tightly, leaving gaps.
As the above, only for reference!

Pasting Matters Needing Attention

After received, please release it and keep flattening 1-2 days, until the stickers is restored flattening, and then paste, to avoid curling edge peeling;
Make sure that the pasting surface must be smooth flat clean and dry;
Before pasting, it is required to do testing on the surface that want to paste, to check over whether be applicable to paste this wall stickers;
When pasting a large area decal, pasting onto the wall surface while peel off the decal slowly to start from the edge corners;
If any bubbles, use a hard card to squeeze out, or a sharp small needle to puncture, and then press flat.
As the above, only for reference!